The Uno R3 CP2102 ATmega328P Development Board is the low-cost version of the popular UNO R3 Arduino. Instead of ATmega16U2 processor, it is assembled with CP2102 IC. Adiy UNO is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
Board Name: Adiy UNO R3 Cp2102
Microcontroller: ATmega328P
USB-Serial IC: CP2102
USB connector: USB-B
Pins:
– Built-in LED Pin: 13
– Digital I/O Pins: 14
– Analog input pins: 6
– PWM pins: 6
Communication:
– UART: Yes
– I2C: yes
– SPI: Yes
Power:
– I/O Voltage: 5V
– Input voltage (nominal): 7-12V
– DC Current per I/O Pin: 20 mA
– Power Supply Connector: Barrel Plug
Clock speed:
– Main Processor: ATmega328P 16 MHz
Memory:
– ATmega328P: 2KB SRAM, 32KB FLASH, 1KB EEPROM
– Width: 53.34 mm
– Length: 68.58 mm
